20″ Whirl A Way with Wheels SS BAR2000S-BE
20” Whirl A Way Surface Cleaner with 4 Casters 180 Deg Max 3000-4500 PSI Max
- 2 x 25 Degree 2.0 orifice nozzles. These nozzle orifices are too small for most commercial pressure washers and will etch concrete surfaces. We highly recommend using 2.5 for 4.0 gpm, 3.5 for 5.5 gpm and 4.5 for 8 gpm.
- Cover/deck is composed of an ABS Polymer
- 30 lbs
- This unit really works best with 5 to 8 gpm and is not recommended for use with high heat.



Nozzle Fanjet SS 1/4" Meg 15* 055
Coil Armature Magento 845126
Mazzoni Oil Visor Plate PMD PM-EDM-E3
HMS3615
Muffler/Exhaust Vanguard Hi-Mount 37HP
MV Rotojet 255040 Turbo Head
Interpump Sandblast Head No 2
Interpump SR Safety Valve
7.3Mtr Telescopic Wand
Fuel Cap Honda 17620747030*
PA Tank Hose Barb 20mm BSP Straight
Tee Brass 1" Female x 1" Female x 1" Female
Engine Honda GX390 UT2 QXER
Sub Harness Honda GX620-GX670 32105ZJ1800*
Burner Motor 12V and Cable
MV Rotojet 400060 Turbo Head
Interpump K3 Unloader Valve
VMS4332BDS
Hose Tail Brass 3/8" Male x 1/2" Tail
Green Jet
Interpump Controlset W2-1
Screw M5 Honda 90006ZE2000*
MV Boom Bracket Ceiling Mount
Oil Level Dipstick Honda 15655Z6L000*
MV Rotojet 400100 Repair Kit
Socket Brass 1/4" Female x 1/4" Female Heavy Duty
Whirl A Way 3 Arm 24"
MMS2313SA3
Muffler/Exhaust Pipe Gasket Honda 18333ZE3801*
High Pressure Ball Valve FF Steel 7250psi 3/8"
Float Valve Set Honda 16011ZE0005*
Gasket Set Honda 16010ZE1812*


